Siemens 3VA1 100 A Manual page 196

Accessories
4.3 Connection system
Side plate for 3VA1 2-pole
Risk of injury
A side plate must be fitted if the side surface at the handle end of a 2-pole 3VA1 breaker
with current rating I
For further information, please refer to Operating Instructions 3ZW1012-0VA10-2AA0.
The order number for the side plate is 3VA9112 - 0SG20.
DC insulating plate
A DC insulating plate must be installed on 3-pole and 4-pole molded case circuit breakers for
some applications:
● U
the bottom panel of the circuit breaker with non-insulated mounting plate
● U
For further information, please refer to Operating Instructions 3ZW1012-0VA10-0AA0
The order numbers for the DC insulating plates are 3VA9113-0SG10 (3-pole) and 3VA9114-
0SG10 (4-pole)
196
CAUTION
> 100 A is freely accessible.
n
> 415 V AC: For IT system applications and entry of incoming feeder cables through
e
> 250V DC: with non-insulated mounting plate
e
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02