Accessories
4.8 Residual current devices
Cable installation
Cable ducts for bringing out cables are provided to the left and right on the residual current
device.
①
Other labels on front panel
Approvals
The residual current device bears the CE mark. For an overview of all approvals, please
refer to Appendix (Page 505).
For all queries relating to approvals, please contact Technical Support (Page 12).
Technical specifications
In ≤ ...A:
Ue ∼ ...V:
...Hz:
346
Cable duct
Specifies the highest permissible rated operational current of the molded case
circuit breaker with which the residual current device may be combined.
Specifies the operating voltage range of the residual current device.
Specifies the operating frequency range of the residual current device.
Denotes the response behavior to residual currents.
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02