Siemens 3VA1 100 A Manual page 217

Components of a complete kit for draw-out technology
A complete kit for draw-out technology contains all the components required to convert the
fixed mounting version of a molded case circuit breaker or switch disconnector to a draw-out
version.
● Draw-out socket including side walls with the mechanical components required to guide
the molded case circuit breaker into and out of the socket under the control of a crank
handle
● 4 fastening bolts for installing the socket in the cubicle
● Plug-in contacts for attachment to the main terminals of the 3VA molded case circuit
breaker
– 3-pole: 6 plug-in contacts
– 4-pole: 8 connectors
● Side walls with guide bolts for mounting on the molded case circuit breaker
● Autotrip plunger
● 2 screw-mounted terminal covers for the 3VA molded case circuit breaker
Note
Information about the crank handle
The crank handle is not supplied as part of the complete kit and must be ordered separately.
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
4.4 Plug-in and draw-out technology
Accessories
217