Installing the cylinder lock in the accessories compartment
The cylinder lock (type Ronis) is installed together with the adapter kit and the interlocking
version of the cylinder lock housing in the right-hand accessories compartment of the molded
case circuit breaker.
①
②
③
1. Remove the lid of the accessories compartment
breaker.
2. Drill a hole through the lid at the position marked on the rear face and smooth down the
drilled surface with a file.
3. Insert a cylinder lock (type Ronis)
housing
②
4. Install the adapter kit
case circuit breaker.
5. Reattach the accessories compartment lid to the 3VA molded case circuit breaker.
A cylinder lock (type Ronis) is installed at each 3VA molded case circuit breaker to be
included in the interlock arrangement.
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
Adapter kit
Actuating lever
Lid of accessories compartment
④
in the drilled hole and connect it securely to the accessories compartment lid
via the actuating lever.
①
in the right-hand accessories compartment of the 3VA molded
④
Cylinder lock housing for interlocking
⑤
Cylinder lock (type Ronis)
③
from the 3VA molded case circuit
⑤
and the interlocking version of the cylinder lock
Accessories
4.7 Locking and interlocking
279