LED displays
Tripped display
The <RESET> button is not only used to reset the residual current device, but also as a
mechanical indication that the unit has "tripped". If a residual current is detected or the
button <TEST> is pressed, the button <RESET> is automatically released and so signals
that the residual current device has tripped. Even when the residual current device is at zero
potential, the <RESET> remains in the "TRIP" position.
①
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
Residual current device is operating normally
and has not tripped
4.8 Residual current devices
②
Residual current device has tripped
Accessories
323