Auxiliary Ring 1; Auxiliary Ring 2; Phone Options; System Info - Avaya 3600 Series User Manual

Avaya Inc.
Ring delay Determines how long the vibrate cadence will play before the

Auxiliary ring 1

Auxiliary ring 2

Phone options

Noise mode Provides options that describe the noise level in your
Key tones Determine if tones play when keys are pressed. Key tones are
Warning tones: Play to alert user to various conditions, such as system up or
Display contrast Adjusts the display for different lighting situations. Set contrast
Keypad autolock Locks the keypad automatically when in standby mode. The

System info

Phone IP address Displays the IP address currently assigned to the WT. This
Gateway IP address or
Server IP address
Firmware version Displays the software version running the WT.
21-300632, Issue 1, July 2005
Desktop Charger, Dual Charger, and Quad Charger User Guide
audible ring starts. If the Ring Cadence or Vibrate Cadence is
turned off, the Ring Delay option will not appear on the menu.
Select the desired length of Ring Delay:
No
delay: the audible ring starts as soon as the handset starts to
vibrate.
5 second
delay: the handset vibrates for five seconds before the
audible ring starts.
10 second
delay: the handset vibrates to ten seconds before the
audible ring starts.
Designed to be utilized by OAI applications, enabling the user to
set a distinctive ring for these applications. Select the desired
Auxiliary Ring
environment. Selecting the correct option will adjust the WT to
account for background noise. Select
High
environments; for moderate background noise; or
for extremely noisy conditions. Use of the non-Normal modes is
not recommended unless you are in a loud environment or you
may find it difficult to be heard on your WT.
enabled by default. Turn key tones on or off.
down, out of range, etc. These tones are enabled by default. Turn
warning tones on or off.
Up Down
by pressing the and
contrast is displayed and then pressing the
automatic locking function of the keypad may be disabled (the
default) or adjusted for a delay before locking. Select desired
keypad autolock delay:
Disable
: the keypad will not lock.
5 seconds
: the keypad will lock in five seconds
10 seconds
: the keypad will lock in ten seconds
20 seconds
: the keypad will lock in 20 seconds
number may not be edited.
Displays the IP address currently assigned to the Telephony
Gateway (in SRP) or the Avaya Voice Priority Processor
(AVPP).
Normal
for most office
side buttons until the desired
OK
softkey.
Severe
Page 16