A multi-sheet fold copy is counted as a single sheet.
This setting becomes effective only if [Folding Unit Tray Full Detection] is set to [On].
Setting Items
[No. of Sheets Folded after Full
Detection]
• If the display of the warning message is delayed, the paper delivered to the folding unit tray may
not be stacked properly or the delivered paper may block the paper exit and cause subsequent
paper to be misfed.
0608: [Z-fold Position 1]
Adjust the width of the bottom end segment (S) of Z-folded sheets when using the multi-folding unit.
Press [ ] to increase (S) and [ ] to reduce it.
The
mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
S
Paper feed direction
Default
Max.
Value
Value
0
250
L
CEZ001
Min.
Step
Value
0
1
mark indicates
Setting Values
Unit
sheet(s)
87