Ricoh Pro C5210s Operating Instructions Manual page 147

Setting Items
[Fusing Nip Width: Envelope:
Decompression: L Temp]
061: [Accumulate Heat Before Feeding Envelope]
Specify the time to wait for heat to accumulate before printing on an envelope.
If fusing errors occur on an envelope, press [+] to increase the waiting time to reduce fusing errors.
Pressing [-] will decrease the accumulation time, but fusing errors may occur.
Setting Items
[Accumulate Heat Before Feeding
Envelope]
062: [Smoothing Roller Auto Execute Setting]
Specify the frequency of automatic fusing refresh.
• [Automatic Execution]: Automatic fusing refresh is performed once per 4.5 kp.
• [Auto Execute: Frequently]: Automatic fusing refresh is performed once per 2.25 kp.
Setting Items
[Smoothing Roller Auto Execute Setting]
063: [Smoothing Roller Paper Type Ratio]
Specifies the frequency of automatic fusing refresh.
With the three different levels of frequency available in 062: [Smoothing Roller Auto Execute Setting],
this setting allows you to specify the frequency in greater detail.
Press [+] to increase the number of sheets to be fed before automatic fusing refresh is performed (or
decrease the frequency of automatic fusing refresh), and press [-] to decrease the number of sheets to be
fed before automatic fusing refresh is performed (or increase the frequency of automatic fusing refresh).
Example:
• When [Smoothing Roller Auto Execute Setting] = [Do not Execute Automatically] and [Smoothing
Roller Paper Type Ratio] = 100,
Max. Value Min. Value
5 1
Max. Value Min. Value
500 0
[Do not Execute Automatically]
[Automatic Execution]
[Auto Execute: Frequently]
Setting Values
Step Unit
1 -
Step Unit
1 sec
Values
145