Ricoh Pro C5210s Operating Instructions Manual page 74

2. Details of Menu Items in Adjustment Settings for Skilled Operators
0816: [Output Fan Setting]
Specify how the shift tray fan moves when using Finisher SR5070 or Booklet Finisher SR5080.
To separate sheets stuck together, blow air to them that are delivered to the shift tray.
[Output Fan Setting]
0817: [Output Fan Level]
Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5070 or Booklet Finisher
SR5080.
If sheets to the shift tray are stuck to each other when this setting is at its default value, increase the fan
capacity.
[Output Fan Level]
0818: [Staple Position for Booklet]
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5080.
Press [+] to move the position left, or press [−] to move it right on the open booklet.
72
Setting Items
Setting Items
Paper feed direction
Values
[Auto]
[On]
[Off]
[Coated Paper: On]
[Large Size (More than
364 mm): On]
Values
[Auto]
[Increase Air Volume]
CDS024
Default Value
[Auto]
Default Value
[Auto]