Ricoh Pro C5210s Operating Instructions Manual page 112

4. Details of Menu Items in Advanced Settings
No.
058 [Fusing Nip Width
Adjustment: Envelope]
059 [Fusing Nip Width:
Envelope: Decompression]
060 [Fusing Nip Width:
Envelope: Decompression:
L Temp]
061 [Accumulate Heat Before
Feeding Envelope]
062 [Smoothing Roller Auto
Execute Setting]
063 [Smoothing Roller Paper
Type Ratio]
103 [Paper Feed Interval
Setting]
104 [Initial CPM Setting: Low
Temp]
105 [Initial CPM Setting]
106 [CPM Setting when
Temperature is
Decreasing]
Decurler Adjustment
For details about the following items, see page 149 "Decurler Adjustment".
No.
100 [Paper Curl Correction
Level]
101 [Paper Curl Correction
Level Adjustment]
110
Item
Adjust the nip width between the fusing belt and pressure
roller when an envelope is being fed.
Specify whether to wait for heat to accumulate before
printing on an envelope at a high/normal temperature.
Specify whether to wait for heat to accumulate before
printing on an envelope at a low temperature.
Specify the time to wait for heat to accumulate before
printing on an envelope.
Specify the frequency of automatic fusing refresh.
Specifies the frequency of automatic fusing refresh.
Adjust the interval between the feeding of each sheet.
Select one of the three levels of copy/print speed
reduction at low temperatures.
Select one of the three levels of copy/print speed
reduction at normal room temperature and above.
Adjust the threshold temperature at which to reduce the
print speed at low temperatures.
Item
Adjust the degree of paper decurling by the decurler unit.
Adjust the contact pressure between the soft roller and
metal roller in the decurler unit.
Description
Description