Ricoh Pro C5210s Operating Instructions Manual page 111

No.
049 [Contact Movement of Ppr
Trns in Low Pressure]
032 [Textured Paper Mode]
033 [Textured Paper Mode
Voltage: BW: Side 1]
034 [Textured Paper Mode
Voltage: BW: Side 2]
035 [Textured Paper Mode
Voltage: FC: Side 1]
036 [Textured Paper Mode
Voltage: FC: Side 2]
Fuser Adjustment
For details about the following items, see page 141 "Fuser Adjustment".
No.
050 [Fusing Temp]
051 [Fusing Pressure Roller
Temp]
052 [Fusing Nip Width Setting]
053 [Fusing Temp to Feed Ppr]
054 [Additional Fusing Temp
1]
055 [Additional Fusing Temp
2]
056 [Cleaning Web Rotation
Interval]
057 [Cleaning Web Contact
Position]
Item
Adjust the secondary transfer nip pressure when 045:
[Ppr Trns Contact Mode] is set to [Low Pressure].
Specify whether or not to enable Textured Paper mode.
Adjust the voltage applied to the paper for paper transfer
when printing in each print mode (color/black-and-
white, one-side/duplex) with Textured Paper mode
enabled.
Item
Adjust the heat roller temperature.
Adjust the pressure roller temperature.
Adjust the nip width between the fusing belt and pressure
roller.
Adjust the fusing temperature at which to allow paper
feeding after warming up.
Adjust the fusing unit's accumulated temperature for a
specific time after a job starts.
Adjust the fusing unit's accumulated temperature for a
specific time after writing starts.
Specify the interval between each activation of the
cleaning web.
Specify how the cleaning web comes into contact and
separates.
Menu Items and Functions
Description
Description
109