Ricoh Pro C5210s Operating Instructions Manual page 148

4. Details of Menu Items in Advanced Settings
Automatic fusing refresh is performed once per 4.5 kp.
• When [Smoothing Roller Auto Execute Setting] = [Do not Execute Automatically] and [Smoothing
Roller Paper Type Ratio] = 40
Automatic fusing refresh is performed once per 1.8 kp.
Setting Items
[Smoothing Roller Paper Type Ratio]
103: [Paper Feed Interval Setting]
Adjust the interval between the feeding of each sheet.
The standard interval is "100". If you set this to "50", the throughput will be reduced in half.
Press [+] to increase the interval and [−] to reduce it.
• Depending on the fusing unit's temperature and the size of paper, if you increase the interval by
pressing [−], the copy/print speed may decrease.
Setting Items
[Paper Feed Interval Setting]
104: [Initial CPM Setting: Low Temp]
Select one of the three levels of copy/print speed reduction at low temperatures.
If the temperature of the fusing unit fall below a certain point, the machine will reduce the copy/print
speed to increase fusibility. You can select from the three levels of copy/print speed reduction.
Pro C5200S
• [Do not Reduce]
65 cpm (full speed)
• [Reduce Level 1]
52 cpm (80% of full speed)
• [Reduce Level 2]
42 cpm (65% of full speed)
• [Reduce Level 3]
32 cpm (50% of full speed)
146
Max. Value Min. Value
100 0
Max. Value Min. Value
100 1
Step Unit
1 %
Step Unit
1 %