Ricoh Pro C5210s Operating Instructions Manual page 144

4. Details of Menu Items in Advanced Settings
• Decreasing the temperature too much may cause the toner to not properly fuse to the paper. (cold
offset).
Setting Items
[Fusing Pressure Roller Temp]
052: [Fusing Nip Width Setting]
Adjust the nip width between the fusing belt and pressure roller.
Press [+] to increase the nip width and [−] to reduce it.
• Changing this setting may lead to insufficient fusing, which may cause the toner to unfuse from the
paper (cold offset).
Setting Items
[Fusing Nip Width Setting]
053: [Fusing Temp to Feed Ppr]
Adjust the fusing temperature at which to allow paper feeding after warming up.
Paper feeding starts when the fusing unit reaches the temperature defined by the selected mode. Select
one of the following modes:
1-3, 5, 6 This is the normal printing mode that is assigned according to the paper type.
4 To reduce problems with glossiness and fusing errors that may occur initially, this mode
allows the temperature of the machine to be brought to a stable fusing temperature before
printing starts.
Setting Items
[Fusing Temp to Feed Ppr]
054: [Additional Fusing Temp 1]
Adjust the fusing unit's accumulated temperature for a specific time after a job starts.
142
Max. Value Min. Value
200 50
Max. Value Min. Value
3 1
Max. Value Min. Value
6 1
Step Unit
1 degree(s)
Step Unit
1 None
Step Unit
1 None