Toner Adhesion Adjustment - Ricoh Pro C5210s Operating Instructions Manual

4. Details of Menu Items in Advanced Settings
• [Middle]
50 cpm
• [Low]
32 cpm
Pro C5210S
• [High]
80 cpm (full speed)
• [Middle]
55.8 cpm
• [Low]
35.7 cpm
• In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the
toner may not properly fuse to the paper.
• Depending on the type of paper, you can increase the toner gloss by changing this setting from
[High] to [Middle] or from [Middle] to [Low].
[Process Speed Setting]

Toner Adhesion Adjustment

011: [Maximum Image Density: K]
Adjust the intermediate transfer belt toner adhesion for black.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items
[Maximum Image Density: K]
128
Setting Items
[Low]
[High]
[Middle]
Max. Value Min. Value
5 -5
Values
Step Unit
1 None