Table of Contents
Advertisement
Vector Solo 65kV Applicator - Maintenance
3. Install the air valve cartridge. Align the cartridge
with tab at 12 o'clock posiition.
Figure 53: Air Valve Cartridge Alignment
4. Install the rear seal.
Figure 54: Rear Cartridge Seal Replacement
5. Install air valve.
Figure 55: Air Valve Replacement
AH-08-02.6
Power Module - Fluid Fitting Removal
1. Remove power module from handle.
2. Remove two (2) screws using a 2.5mm Allen wrench.
Figure 56: Power Module Removal
Figure 57: Fluid Fitting Removal
34
Advertisement
Table of Contents
