Vector Solo 65kV Applicator - Maintenance
3. Pull the module straight off the handle.
Figure 46: Power Module Removal
The power modules are not serviceable.
Handle Disassembly
1. Remove barrel.
2. Remove power module.
3. Push air valve out.
Figure 47: Air Valve Removal
AH-08-02.6
NOTE
1 - Push Out From Here
4. Remove the rear seal.
Figure 48: Rear Seal Removal
5. Using a dowel rod, push out the air valve
cartridge.
Figure 49: Air Valve Cartridge Removal
Ransburg
1 - 6mm (1/4") Dowel
32