Table of Contents
Advertisement
Vector Solo 65kV Applicator - Introduction
79965 VECTOR SOLO 65KV SOLVENTBORNE
SPECIFICATIONS
Environmental/Physical
Applicator Length:
Weight:
Hose 79727-XX
Lengths (Std):
Atomizer Nozzle
Assembly (Std):
Electrical
Operating Voltage:
Current Output:
Paint Resistance:*
*(Use Model No. 76652, Test Equipment)
Part Sprayability:
(See current "Paint, HV & SCI Test Equipment"
service manual.)
AH-08-02.6
257mm (10.1-inches)
834 grams (29.4 oz.)
10m, 15m, 20m, and 30m
79374-65, 79377-44 (1.4mm)
65kV DC (-) maximum
130 microamperes maximum
.1 MW to
∞
Determine sprayability of
part to be coated using
76652, Test Equipment
Mechanical
Fluid Flow
Capacity:
1000 ml/minute**
Wetted Parts:
Stainless, polyethylene,
nylon, acetal polymer
Operating Pressure (Air Spray)
Fluid:
(0-6.9 bar) 0-100 psi
Air:
(0-6.9 bar) 0-100 psi
Ambient Temp.:
40°C to 0°C
(104°F to 32°F)
Consumption:
470 SLPM (16.6 SCFM) @
2.8 bar (40 psig) @ Handle
Inlet
Sound Level:
92dB (A) @ 2.8 bar
(40 psig) Inlet,
1m from applicator
Vibration Level:
0.065 m/S
(40 psig) @ Handle Inlet
** This reflects the maximum fluid volume the appli-
cator can deliver. The maximum spray volume that
can be effectively atomized depends on fluid rheolo-
gy, spray technology, and finish quality required.
Ransburg
@ 2.8 bar
2
10
Advertisement
Table of Contents
