Symmetricom TimeSource 2700 Manual page 54

Cdma primary reference source

Table of Contents

Procedure C. Power-Up (cont'd)

Step

Open the BTMONitor application. The COMM Port Selection screen appears.

Choose a communications port by clicking one of the following:

• Select Last Used Port: COMx:. This selection will use the named serial communications

port, which BTMONitor identifies as the one used in the previous session, when the

OK button is clicked.

• Automatic Selection, Scan COM Ports. This selection will scan the serial

communications ports on the host computer for the communications port connected

to the TimeSource 2700, when the OK button is clicked.

• Manual Selection: Allows the user to enter or choose the host computer

communication port that is connected to the TimeSource 2700.

TimeSource 2700

Action

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting

Do you have a question about the TimeSource 2700 and is the answer not in the manual?