Shelf Considerations - Symmetricom TimeSource 2700 Manual

Cdma primary reference source

Table of Contents

Shelf Considerations

Rack Mounted

The TimeSource 2700 Shelf can be mounted in either a

19 inch or 23 inch rack. Supplied mounting ears can be

positioned for flush or 5 inch offset mounting. Allow for two

RUs (3-1/2 inches) of vertical space on the rack, per shelf.

To make power, input, output, and alarm connections from

the rear of the rack, instead of the front of the shelf, a

wire-wrap panel is available separately, as an option. The

wire-wrap panel can be mounted below a rack-mounted

shelf, in either a 19 inch or 23 inch rack. Mounting ears

(supplied with the option) can be positioned for flush or

5 inch offset mounting. Allow for two RUs (3-1/2 inches) of

vertical space on the rack, per wire-wrap panel.

Wall Mounted

The TimeSource 2700 can be attached to a wall or other

surface by ordering the appropriate wall-mount

configuration option.

TimeSource 2700

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the TimeSource 2700 and is the answer not in the manual?