Symmetricom TimeSource 2700 Manual page 141

S S S S S S S S
Table Q. Message Troubleshooting (cont'd)
Message (conddescr)
TEMPERATURE
ERROR
DOWNLOAD
FAILED
DOWNLOAD IN
PROGRESS
DOWNLOAD
SUCCESSFUL
CDMA ERROR
POWER UP
RESTART
RO x ERROR
RO x LOSS OF
SIGNAL
SPAN x AIS
S S S S S S S S
Meaning
A temperature error has been
detected on the internal
oscillator.
EVENTS
The software download has
failed.
Software is being downloaded.
The software has been
downloaded successfully.
The CDMA receiver is
reporting an error.
The system processor has just
started up.
An error has been detected
on the specified remote
oscillator input signal.
The specified remote
oscillator input signal has been
lost.
An alarm indication signal
(AIS) has been received on
the specified T1 input span.
S S S S S S S S
Recommended Action
1. Check that the ambient air
temperature is within the
TimeSource 2700 environmental
specifications. If not, correct the
ambient temperature with heating or
air conditioning.
2. If the ambient air temperature is
within the TimeSource 2700
environmental specifications, replace
the system.
Retry the software download.
Wait until the download has been
completed.
None required.
None required.
None required.
Wait until this becomes a minor alarm,
or start troubleshooting the specified
remote oscillator input now (check the
signal frequency).
Wait until this becomes a minor alarm,
or start troubleshooting the specified
remote oscillator input now (check the
cable, connections, source).
Wait until this becomes a minor alarm,
or start troubleshooting the specified
span input now (check the source).
S S S S S S S S
141
Troubleshooting
S
2
3
5