Vlan Group Commands; Display Vlan-Group - HPE FlexNetwork 5130 EI Series Command Reference Manual

Examples
# Assign ARP packets in Ethernet II encapsulation and IPv4 packets to VLAN 3 for transmission.
(The protocol type ID for ARP is 0806 in hexadecimal notation.)
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] protocol-vlan 1 ipv4
[Sysname-vlan3] protocol-vlan 2 mode ethernetii etype 0806
Related commands
display protocol-vlan interface
display protocol-vlan vlan
port protocol-vlan

VLAN group commands

display vlan-group

Use display vlan-group to display VLAN group information.
Syntax
display vlan-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name : Specifies a VLAN group by its name, a case-sensitive string of 1 to 31 characters.
The first character must be an alphabetical character. If you do not specify this argument, the
command displays information about all VLAN groups.
Examples
# Display information about VLAN group test001.
<Sysname> display vlan-group test001
VLAN group: test001
VLAN list: 2-4 100 200
# Display information about all VLAN groups.
<Sysname> display vlan-group
VLAN group: test001
VLAN list: 2-4 100 200
VLAN group: rnd
VLAN list: Null
Table 44 Command output
Field
VLAN group
Description
Name of the VLAN group.
201