Setting up SMTP authorization
If desired, set the XTP CrossPoint to require SMTP authorization before accepting any
e-mail as follows:
1.
Click
(see
figure 62
Edit
2.
Check the
SMTP Authorization Required
and
fields below the check box.
Name
Password
3.
Enter a user name and a password in the
XTP CrossPoint to accept their e-mail messages, senders must enter the user name
and password.
NOTES:
•
For the User name, any combination of letters, numerals, spaces, and symbols
except the comma (
valid. For the password, all characters except the comma are valid. The user
name and password can each be from 1 to 30 characters.
•
Both a user name and a password must be specified.
4.
Click
to save the user name and password (
Save
Deselecting SMTP authorization
Remove SMTP authorization as follows:
1.
Click
(
). The button changes to
Edit
2
2.
Click (deselect) the
SMTP Authorization Required
3.
Click
(
).
2
Save
Domain Name field
The
field (
4
Domain Name
matrix switcher uses to log on to the e-mail server. Standard domain name conventions (for
example:
) apply.
xxx.com
NOTE: The HTML language reserves certain characters for specific functions (see
Special Characters
on page 120). The @ character is acceptable only as the lead-in
to the domain name (such as @folklore.net).
Email Address fields
The five
fields (
Email Address
the XTP II CrossPoint Series matrix switcher e-mails notification of its failure and repair
status. Standard e-mail address conventions (
The check boxes and drop boxes associated with each address field permit the operator
to specify specific criteria under which the matrix switcher will e-mail recipients. In the
associated
Missing Inputs
or absence of a signal. Check the
and power supplies. In the associated
the recipient is to be e-mailed of failures, fixes, both, not notified, or to be removed from
the e-mail list. The
Suspend
e-mail list when they are unavailable, such as if travelling or on vacation. Deleting an e-mail
addressee and clicking the
completely.
on the previous page,
2
check box (
User Name
) and the single and double quotation marks (
,
2
.
Save
) displays the domain name that the XTP CrossPoint Series
) identify the e-mail addresses of the personnel to whom
7
nnnnn@xxx.com
scroll boxes (
), select the inputs to monitor for presence
8
(
) and
9
Fans
Power
Email Options
option is useful for temporarily removing personnel from the
button (
) removes the recipient from e-mail notification
Save
2
XTP CrossPoint Series • HTML Operation
). The button changes to
Save
). This enables the
5
and
fields (
). For the
6
Password
and
'
).
check box (
).
4
) apply.
(
) boxes to monitor the cooling
¢
drop-down list (
), select whether
£
.
User
) are
"
131