Ethernet Connection; Ethernet Link; Default Ip Address - Extron electronics XTP CrossPoint1600 User Manual

Xtp crosspoint series configurable digital video matrix switchers
Table of Contents

Advertisement

Ethernet Connection

This section provides a high level discussion of the Ethernet connection to the matrix
switcher and a primer on the subject of subnetting. Topics that are covered, include:

Ethernet Link

The rear panel Ethernet connector on the XTP CrossPoint Series matrix switcher can be
connected to an Ethernet LAN or WAN. This connection makes SIS control of the matrix
switcher possible using a computer or control system connected to the same LAN.
Ethernet Connection
The Ethernet cable can be terminated as a straight-through cable or a crossover cable and
must be properly terminated for your application (see figure 80).
Pins:
1 2 3 4 5 6 7 8
Side View
Insert Twisted
Pair Wires
RJ-45 Connector
Figure 80.

Default IP Address

To access the XTP CrossPoint Series matrix switcher via the LAN port, you need the
IP address of the matrix switcher. If the address has been changed to an address
comprised of words and characters, you can determine the actual numeric IP address
using the ping utility. If the address has not been changed, the factory-specified default is
192.168.254.254.
Ping can also be used to test the Ethernet link to the XTP CrossPoint Series matrix switcher.
Ethernet Link
Subnetting — A Primer
Crossover cable — Direct connection between the computer and the
XTP CrossPoint Series matrix switcher
Patch (straight-through) cable — Connection of the XTP CrossPoint Series matrix
switcher to an Ethernet LAN
Straight-through Cable
(for connection to a switch, hub, or router)
End 1
Pin Wire Color
Pin Wire Color
1
white-orange
1
2
orange
2
3
white-green
3
4
blue
4
5
white-blue
5
6
green
6
7
white-brown
7
8
brown
8
RJ-45 Connector Pinout Tables
(for direct connection to a PC)
End 2
End 1
Pin Wire Color
white-orange
1
white-orange
orange
2
orange
white-green
3
white-green
blue
4
blue
white-blue
5
white-blue
green
6
green
white-brown
7
white-brown
brown
8
brown
XTP CrossPoint Series • Ethernet Connection
Crossover Cable
End 2
Pin Wire Color
1
white-green
2
green
3
white-orange
4
blue
5
white-blue
6
orange
7
white-brown
8
brown
152

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtp crosspoint 3200

Table of Contents