DEVI DEVIreg Touch Installation Manual page 9

DEVIreg™ Touch
Note: A floor sensor enables a more accurate
temperature control and is recommended in
all floor heating applications and mandatory
under wooden floors to reduce the risk of
over-heating the floor.
Place the floor sensor in a conduit in an appropriate
place where it is not exposed to sunlight or draft from
door openings.
Equally distant and >2cm from two heating cables.
The conduit should be flush with the floor surface -
countersink the conduit if necessary.
Route the conduit to the connection box.
The bending radius of the conduit must be min 50mm.
Installation Guide 9