Calls
Procedure
Step 1
Press Transfer.
Step 2
Enter the other person's phone number.
Step 3
Press Swap to return to the held call.
Step 4
Press Transfer to complete the transfer.
Conference Calls and Meetings
You can talk with several people in a single call. You can dial another person and add them to the call.
When you add more than one person to a conference call, wait a few seconds between adding participants.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.
Add Another Person to a Call
When you are on a call, you can add someone else to your conversation.
Procedure
Step 1
From an active call, press Conf.
Step 2
Enter a number.
Step 3
Press Conf.
Swap Between Calls Before You Complete a Conference
You can talk to a person before you add them to a conference. You can also swap between the conference
call and the call with the other person.
Procedure
Step 1
Call a new conference participant, but do not add the participant to the conference.
Wait until the call is connected.
Step 2
Press Swap to toggle between the participant and the conference.
Conference Calls and Meetings
Cisco IP Conference Phone 7832 User Guide
29