Switch Between Calls On Same Line; Create Conference With Two Calls On Same Line; Transfer Two Calls On Same Line - Cisco 8831 User Manual

Calling features

Switch between calls on same line

Procedure
Step 1
Press Swap to switch between two calls on the same line.
Step 2 If there are more than two calls on the line, select a call from the call list and press Resume.

Create conference with two calls on same line

Procedure
Step 1 With two connected calls on the same line, select a call to make it the active call.
The second call is put on hold.
Step 2 Press Conference.
Step 3
Press Calls to view the call list and select the caller to add to the conference.
Step 4 Wait for the call to connect.
Step 5 Press Conference to add the participant to your call.
The conference begins.
Step 6 (Optional) Repeat to add additional participants.

Transfer two calls on same line

Before You Begin
You must be on an active call to transfer calls.
Procedure
Step 1 Press Transfer.
Step 2 Enter phone number or press a speed-dial button for the transfer destination.
When you have reached the maximum number of calls for your line, pressing Transfer allows you to select
the calls from a list of calls on the line.
Step 3 Wait for the recipient to answer.
Step 4
Press Transfer again.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
Switch between calls on same line
57