Restore To The Factory Settings - HIKVISION DS-3WF03C-D User Manual

User Manual of User Manual of DS-3WF03C-D
other devices, or leave it unconnected other devices, or leave it unconnected
5. Mount the DS-3WF03C 3WF03C-D securely to the pole by locking the strap tightly.
2.2
Restore to the Factory

Restore to the Factory Settings

In some cases, uses can restore the device to the factory settings by the following way in In some cases, uses can restore the device to the factory settings by the following way in In some cases, uses can restore the device to the factory settings by the following way in
the figure. Push the reset button for 5~10 seconds until all LED . Push the reset button for 5~10 seconds until all LEDs are on. Th
will restore to the factory setting. During this process, the will restore to the factory setting. During this process, the DS-3WF03C
will be connected and disconnected twice. will be connected and disconnected twice.
For default, all the factory settings are shown in the following table. For default, all the factory settings are shown in the following
Items
IP address
User name
Password
Output power
Encryption
Network mode
Outdoor Video Wireless Network Outdoor Video Wireless Network Bridge
securely to the pole by locking the strap tightly.
Figure 2-2 Restore to the factory settings
Table 2-1 Main parameters at the factory settings Table
Default Settings
192.168.1.35/192.168.1.36
admin
admin
High
WPA->WPA2->CCMP->Password:1234567890abc
Bridge
13
on. Then the device
WF03C-D's RJ45 ports
>Password:1234567890abc