HIKVISION DS-3WF03C-D User Manual page 25

User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
SSID: Name of a wireless network.
Shown in figure, the user can click the Select button to list all the SSIDs that can be
associated, and then choose the one need to be associated.
Frequency MHz: This only appears when the device is configured to Access Point mode
or WDS Access Point mode. The device can only work on one channel at the same time.
Frequency scan list: This only appears when the device is configured to Station mode or
WDS Station mode. If it's not enabled, the station will scan all the channels which both
the device and the country code allowed and then choose the same channel as the
associated AP. If it's enabled, click select, another window will pop up and let the user to
choose the working channels, and the channels should include the associated AP's
channel, which can fasten the association process between the AP and the Station.
Output Power: Output power of the device.
Country Code: Different countries allows different channels, use can choose the country
code to only allow the device works at the channels permitted in the particular country.
Channel Width: Channel width selection, and DS-3WF03C-D device supports
5MHz/10MHz/20MHz/40MHz bandwidth.
Max TX Rate: Max transmission rate, and it can be used to limit the max transmission
rate of a device.
Root AP MAC Address: In Station, WDS Station, and WDS Repeater modes, users can
use this to limit the APs associated to.
Security: User can set the security based on needs to guarantee the wireless security.
WPA: Encryption method supported by 802.11 Protocol.
25