HIKVISION DS-3WF03C-D User Manual page 33

User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
Distance: The distance can be set manually if the Auto ACK-Timeout Adjust is disabled,
otherwise, the distance parameter is not allowed to be set. It is suggested the distance
is set automatically by enabling Auto ACK-Timeout Adjust parameter.
Aggregation: It enables several data frames of 802.11 to be aggregated and transmitted
out, thus improve the throughput. In default, it's enabled.
Multicast Data: When it's enabled, DS-3WF03C-D devices allow multicast function.
Device Discover: This feature should be used with the Hikvision tool. The tool window
will display the MAC address of the device, IP address, and product name and so on.
When the equipment is found by wireless way, please keep multicast support enabled.
Station Isolation: Enabling this feature can make connection with an access point, the
WDS access points, WDS repeater equipment cannot communicate with each other,
even though the client IP duplicate nor of communication have any impact.
Max Station Limit: By setting it to limit the number of clients and WDS clients that are
connected to an access point, a WDS access point, a WDS repeater.
LED configure: This is to configure the signal strength value needed to light on. There
are 3 LEDs on DS-3WF03C-D devices (LED3 value > LED2 value > LED1 value). The default
values are -86dBm, -71dBm and -56dBm. When LED1 value < signal strength < LED2
value, LED1 is lighted on; When LED2 value < signal strength < LED3 value, both the
LED1 and LED2 are lighted on; When signal strength > LED3 value, all three LEDs are
lighted on.
33