Super Io Device Configuration; 2Nd Super Io Configuration - General Dynamics Itronix GoBook MR-1 Manual

GoBook MR-1
Threshold value:
Keyboard Backlight Time out
Left Button On Matrix Keyboard

Super IO Device Configuration

This configuration option allows you to assign Serial Port settings for an Office or Vehicle doc (if you are using
one) and to assign GPS port settings (if your unit has GPS capability)
Field
COM Port On POD
Configure:
Base I/O address:
GPS Port Configure:
Base I/O address:

2nd Super IO Configuration

This configuration option is only displayed if you have an Expansion Module on your unit. It allows you to activate
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh96AE.htm
Sets the threshold (in Lux.) at which
0-2047
the keyboard backlight activates.
0-255 Sets the time in seconds until the
keyboard backlight turns off due to
inactivity.
Enables/Disables the left mouse
Enable
button on the GoBook MR-1
keyboard.
Disable
Setting Function
Turns the Office or Vehicle dock serial port
Enabled
Disabled on/off
Sets the base I/O address for the Office or
3F8
2F8 Vehicle dock serial port.
3E8
2E8
Turns GPS serial port on/off
Enabled
Disabled
Sets the base I/O address for GPS port
3F8
2F8
3E8
2E8
Page 56 of 90
6/18/2008