Usb Control Sub-Menu; Super Io Configuration - General Dynamics Itronix GD2000 User Manual

GD2000 User Guide

USB Control Sub-Menu

The USB Control sub-menu is used to configure all
USB ports.
Field
External USB Ports
USB Devices for Expansion
Module
Legacy USB Support

Super IO Configuration

This configuration option allows you to assign serial port
settings for an office or vehicle dock (if you are using one)
and to assign GPS port settings (if your unit has GPS
capability).
Field
Serial Port
Base I/O address
General Dynamics Itronix 72-0139-001
Setting Description
e
Enables/Disables all external USB ports.
nabled
Disabled
e Enables/Disables all USB Controller Functions for the Slice module.
nabled
Disabled
e
Enabled: allows USB devices to operate during Power On Self-Test
nabled
(POST). Required to use USB keyboard/mouse or to boot from USB
Disabled
drive.
Disabled: No USB devices recognized during boot process.
Setting Function
e
Enables or disables the Serial Port (COM).
nabled
Disabled
3F8 Sets the base I/O address for the Office or Vehicle dock serial port.
2F8
3E8
2E8
Customizing the BIOS