Tpm State Menu - General Dynamics Itronix GoBook MR-1 Manual

GoBook MR-1
Set User
Password
Set
Supervisor
Password
Password on
Boot
TPM Support
Fingerprint
PBA
Function

TPM State Menu

After the TPM Support option on the Security Menu is enabled, the TPM State menu appears. Select it to display
the screen below:
Field
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh96AE.htm
Enter New The User Password controls access to the system at
boot. The Password can be removed or changed by
pressing enter on this field and entering the current
Password
password, then pressing enter to move though the
fields entering a new password, or leaving it blank to
Confirm
remove the password. This password can only be
New
entered if the Supervisor has entered a password first.
Password.
Enter New The Supervisor Password controls access to the Setup
Utility. The password must be entered and confirmed.
The Password can be removed or changed by
Password
pressing enter on this field and entering the current
password, then pressing enter to move though the
Confirm
fields entering a new password, or leaving it blank to
New
remove the password.
Password.
Enables user password entry on boot.
Disabled
Enabled
Enables Trusted Platform Module (TPM) support.
Disabled
Enabled When this item is enabled, a new "TPM State" item
appears on the BIOS menu.
Enabled - Fingerprint scan to replaces boot password.
Disabled
Enabled
Disabled - Fingerprint scan not required for boot.
Note: This field will be "greyed out" (unavailable) if a
supervisor password is not entered.
Setting Function
Page 64 of 90
6/18/2008