Service And Upgrade Safety And Precautions - General Dynamics Itronix GoBook MR-1 Manual

GoBook MR-1
Do not place this product in a built-in installation unless proper ventilation is provided
Do not store the computer at temperatures above 167°F (75°C) or below -67°F (-55°C)
Do not step on or place anything on the power cord
Do not slam the display lid when you close it
Do not place any object on top of the computer when the display is closed
If you use the computer with an extension cord, ensure that the total ampere ratings of all the devices sharing
the extension do not exceed the rating of the extension cord or the rating of the wall outlet
Do not push foreign objects into the computer through any of the slots or openings. Dangerous voltages are
present, which could cause electric shock, fire, or damage sensitive components
The computer is designed to withstand spills. If a spill occurs, power off the computer and wipe it down
before continuing to use the computer
For best results, use a power strip with a built-in surge protector. Do not use inferior extension cords as this
may result in damage to your computer
FAA regulations require that all transmit/receive devices be turned off during flight. If you have radios in
your computer (including GPS) and your computer is equipped with a radio on/off switch, please use it to turn
your radios off during flight. If you have radios and you do not have a switch to turn the radios off, either
leave your computer off during flight or contact your help desk for assistance

Service and Upgrade Safety and Precautions

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage points or other risks and may void your warranty. Refer all servicing to qualified service personnel
Unplug this product from the wall outlet and refer servicing to authorized service personnel under the
following conditions:
When the power cord or plug is damaged or frayed
If the product does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal condition
If the product exhibits a distinct change in performance, indicating a need for service
Do not upgrade or service this computer without prior authorization from the manufacturer. Damage caused
by servicing that is not authorized may void your warranty
Before performing any manufacturer authorized service or upgrade, first follow these instructions:
Prevent damage from static electricity by following ESD precautions
Place the computer on a clean, flat surface
Turn off the computer and disconnect the power supply
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh96AE.htm
Page 4 of 90
6/18/2008