Attaching An External Monitor Or Video Device; Using Simultaneous Display; Using Extended Display - General Dynamics Itronix GoBook MR-1 Manual

GoBook MR-1
This computer has a keyboard with thumb operated keys. If you feel more comfortable using a desktop keyboard,
you can connect a USB external keyboard to the USB port. You can also connect a USB mouse or other pointing
device to the USB port.
NOTE The Unit only has a single USB port so you cannot install both a keyboard and mouse (unless you have a
dock or expansion module).

Attaching an External Monitor or Video Device

The GoBook MR-1 has a VGA monitor port (Video Out) on the Office Dock so you can connect an external
monitor. You may use an external monitor simultaneously with your notebook's display, instead of your notebook's
display, or as an extension of your notebook's display. To attach an external monitor, perform the following:
1. Locate the external monitor port (1) on the back side
of your Office Dock.
2. Connect the video signal cable from the external
monitor (or the VGA adapter) to this port.
3. Connect the power cable from the external monitor to
a power outlet and turn on the monitor.
Read the monitor manual for additional instructions.

Using Simultaneous Display

Your computer takes advantage of Windows dual-display capability, allowing you to use your computer for
presentation purposes. To use simultaneous display, connect an external display device to the external monitor port.
You can then toggle the display output location by pressing
attached external display, or both displays simultaneously. Keep pressing
you want.

Using Extended Display

When using an external monitor you can extend your desktop. This allows you to open and view one program on the
external monitor while viewing a different program on your notebook's display.
1. Right click on the desktop.
2. Select Properties to open the Display Properties Dialogue box.
3. Select the Settings tab.
4. Click on the "2" in the Monitors section.
5. Check "Extend my Windows desktop onto this monitor".
6. Select Apply and OK to save and exit.
7. Now you can drag the programs you want to view onto the external monitor.
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh96AE.htm
. It will output to your computer's display, the
until you have the output option
Page 75 of 90
6/18/2008