GoBook MR-1
The Navigation Help instructions (4) at the bottom of each menu displays the keys used to move through and
change the Settings and Information fields (3) on the left side of the menu.
Press the right and left arrow keys on the direction pad to move to each menu item.
Press the up and down arrow keys on the direction pad to cycle through fields in each menu
Press Esc to exit any sub-menu
Press Enter to make a selection or enter a sub-menu
NOTE You can change the value of a field if it is enclosed in [brackets]. Navigation keys for a menu are shown at
the bottom of the screen. Please refer to the help information that displays in the Field Help Window as you select a
field.
CAUTION Certain fields are highly technical. Do not make changes to a field if you do not understand its
function. For optimum settings, press F9 to load setup defaults; then press F10 to save the changes and exit the
Setup Utility.
NOTE Don't forget your password. If you forget your password, you may have to return your notebook computer
to your dealer to reset it.
BIOS Default Settings
The BIOS configuration on your GoBook MR-1 comes pre-configured at the factory for the best settings. You may
change these settings at any time, but be aware of what these changes do.
To restore the BIOS default settings:
1. Start the GoBook MR-1 and press Enter or the left mouse button on the computer while the opening screen is
displayed
2. Select "Launch System Setup" from the displayed menu
3. When the BIOS Main screen appears, use the Direction Pad to move to the Exit menu
4. Use the direction pad to move down to "Load Setup Defaults" and press enter
5. Then move to "Exit Saving Changes" to accept the default settings.
The Main Menu
This page displays the system time and date, IDE channel sub-menus and information about your computer from
what kind of CPU and how much memory the computer has, to Version numbers:
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh96AE.htm
Page 50 of 90
6/18/2008
Need help?
Do you have a question about the GoBook MR-1 and is the answer not in the manual?
Questions and answers