1
Adjust stretcher bars to desired length
Phase 4
Adjusting Stretcher Bars
2
Tighten 4 factory inset screws to hold the desired length in place
1
Adjust stretcher bar to desired length.
2
Tighten 4 factory inset screws to hold desired length in place.
3
Place caps.
P6
Please contact
cc@amqsolutions.com
if you are missing any parts, have difficulty with assembly, or have any product related questions.
Make sure the screw bracket stays
in the center of the stretcher bars
2
2
ACTIV-Pro3 Installation Guide
1
1
3