Page 1
Press “m” button followed by “1” or “2” to program current height into memory. To return to the memory preset, push the programmed number key once and release. DT Riser will automatically move to pre-programmed height. For questions or support, please contact AMQ Customer Care at cc@amqsolutions.com or (877) 801-0370.
Page 2
2. Reset following Issue 1 instructions. Issue 3: LED displays H01 Solution: System reset Instruction: Reset 18 minutes first, then operate. Note: If the above is ineffective, turn off power for 10 seconds before turning back on. amqsolutions.com ACTIV DT RISER TROUBLESHOOTING GUIDE | 2...