Night Mode - Libelium Waspmote Plug & Sense! Smart Parking Technical Manual

5.2. Night mode

This mode has been developed to use when the parking slot is expected to have fewer changes (i.e. at night) and it has 4
configurable parameters:
Night Mode start hour: Beginning hour of the night mode. 22 hours option is configured by default.
•
• Night Mode duration: Night mode duration time. 8 hour option is configured by default.
Night Mode Sleep Time: Sleep time between consecutive sensor measurements (during night mode). 10 minutes option
•
is configured by default.
Night Mode Keep-Alive: Elapsed time since last transmission to trigger a Keep-Alive frame (during night mode). 4 hours
•
option is configured by default. This frame only contains basic data from the node (parking slot status and battery status).
It is useful to know that there is no change in the slot, but the node is still working.
This mode can be disabled using both the USB Programmer or the Remote Manager.
-9-
Sleep modes
v7.0