Smart Devices App
The list with all available firmware is loaded when the program starts, but users can update it on demand, clicking on "Search
new firmware updates" button. Before installing the firmware, it is necessary to download it. This process is very simple, just
mark the check of the version you want to install from the list IMAGEN app_check.png and click on "Download checked" button.
Figure : Download the firmware selected
When this item is downloaded, a disk will be displayed near it IMAGEN app_disk.png, indicating it is downloaded. Once the
firmware is downloaded, it is ready to install using the "Install Firmware" section at the bottom. In the drop-down will appear all
downloaded versions. Select one and then hit on "Install" button.
Figure : Install the firmware selected
You can also delete the downloaded firmware marking the check from the list IMAGEN app_check.png and then clicking on
"Delete checked" button.
Figure : Delete downloaded firmware
Remember that the USB port must be selected in the programmer tab.
-20-
v7.0
Need help?
Do you have a question about the Waspmote Plug & Sense! Smart Parking and is the answer not in the manual?