Smart Devices App
8.2.3. Configuration
In the last tab "Configuration", it will be displayed all external parameters that the software uses to work. Users can modify this
values in order to get the wished application behavior.
In this case, there is only one parameter available, the API key to connect to Libelium Cloud. This value is provided by Libelium
and it is very important to control the access and get some results needed in the programmer tab. If users don't fill this field, the
software don't work.
Figure : Smart Parking configuration form
-21-
v7.0
Need help?
Do you have a question about the Waspmote Plug & Sense! Smart Parking and is the answer not in the manual?