Transmission Modes - Libelium Waspmote Plug & Sense! Smart Parking Technical Manual

6. Transmission modes

Plug & Sense! Smart Parking has 5 transmission modes allowing to the user to choose between Sigfox, LoRaWAN y their
combinations:
• Sigfox. This mode only use the Sigfox radio to send the data collected by the node. This mode is selected by default.
LoRaWAN. This mode only use the LoRaWAN radio to send the data collected by the node
•
Sigfox + LoRaWAN. In this mode the data collected is sent using the 2 radios. It is recommended to test the node with the
•
two transmission technologies.
Sigfox → LoRaWAN. This mode uses Sigfox radio as primary radio. If there is an issue with the Sigfox radio, it will use
•
LoRaWAN to send the frames.
LoRaWAN → Sigfox. This mode uses LoRaWAN radio as primary radio. If there is an issue with the LoRaWAN radio, it will
•
use Sigfox to send the frames.
-10-
Transmission modes
v7.0