Libelium Waspmote Plug & Sense! Smart Parking Technical Manual page 24

3. Response to the Daily Update Frame with a new configuration for the node. In normal conditions, this will never happen in
the lifetime of the node (or very few times). A change in the node's configuration will only happen when the administrator of
the network decides to change the configuration which was set via the USB Programmer.
Figure : Libelium Callback Configurator screen-shot
Users can create, update and delete the same configuration for several devices. To do that, just type the ID separated by
semicolons (;) like this: 00145F;001460;001461 and the rest configuration parameters will be saved with each device ID.
Here there are the description for all fields:
DEVICE
ID: Device ID of the node. In each platform section we explain how to get this parameter.
•
Name: A name associated to the device ID to make easier for you the identification of the node.
•
-24-
Callback Server
v7.0