Sigfox ID: Sigfox ID that will be loaded from the device.
LoRaWAN EUI: LoRaWAN EUI that will be loaded from the device.
•
USB SETTINGS
•
USB Port: In this list will be displayed all available USB ports to work out with the device. If you plug your device and the
port is not listed, you have click on "Refresh" button in order to update the list.
Figure : Load configuration from node & Send configuration to node buttons
"Load from node" button will read all parameters from the node and will displayed the information in the form. On the other
hand "Send to node" button will overwrite the configuration in the node. All available fields have to be filled, with the proper
format. If any parameter doesn't have an acceptable format, a red cross like this IMAGEN app_cross.png will be displayed near
it and you can't write the information in the node. If the information introduced is valid, a green tick IMAGEN app_tick.png will
be shown.
8.2.2. Firmware upgrade
In this tab, users can select the firmware version to install in their devices.
Figure : Smart Parking firmware upgrade form
-19-
Smart Devices App
v7.0
Need help?
Do you have a question about the Waspmote Plug & Sense! Smart Parking and is the answer not in the manual?