Smart Devices App; Installation; Smart Parking; Programmer - Libelium Waspmote Plug & Sense! Smart Parking Technical Manual

8. Smart Devices App

Libelium Smart Devices App is an important tool developed by Libelium that allows users install new firmware versions and
program the configuration of the new Libelium devices in a few clicks. At the moment it is only available for SmartParking and
MySignals products, but the list will be incremented shortly.

8.1. Installation

First of all and before installing anything, users have to take into account the platform where the application is going to be
installed. To install the Libelium Smart Devices App, it is compulsory to have installed the JDK 1.8. If it is not installed in the
computer, you can follow the steps and download it from this website:
https://docs.oracle.com/javase/8/docs/technotes/guides/install/install_overview.html
Once installed JDK, users can download the application using the appropriate link depending on the operative system:
Ubuntu:
• http://downloads.libelium.com/smart_device_app/SmartDeviceApp_linux64.zip
Windows:
• http://downloads.libelium.com/smart_device_app/SmartDeviceApp_windows32.zip
• Mac: http://downloads.libelium.com/smart_device_app/SmartDeviceApp_macosx64.zip
Then customers only have to extract the content of the SmartDeviceApp zip file downloaded in a place with the right permissions,
and finally execute the file called "SmartDeviceApp" that will initialize the application. Please, note that the extension of this file
will depend on the operative system the user is using at the moment (sh for Linux and OSX, and bat for Windows).

8.2. Smart Parking

This section provides several options to Smart Parking users in order to take full advantage of all possibilities the devices offers.

8.2.1. Programmer

Figure : Smart Parking configuration form
-17-
Smart Devices App
v7.0