Libelium Waspmote Plug & Sense! Smart Parking Technical Manual page 26

Callback Server
Update: Search the node in the list, and click on it. All parameters saved will be loaded in the form.
Create: Overwriting ID and Name fields with ones which do not exist, when the information is saved, it will be created. If the
device ID exists, it will be updated like if you select the device from the list.
Getting the IDs from the node is quite easy from the Libelium Smart Devices App. The IDs to be created in your web server are
marked in the following picture:
Figure : Device IDs readed from the Smart Devices App
Then, it is necessary to configure the rest parameters. Click on "Save configuration" and a background procedure will start to
save all information needed to generate a valid answer to the node.
-26- v7.0