Display Assembly - HP Pavilion 15 Maintenance And Service Manual

Display assembly

NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information,
see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Disconnect the wireless antenna cables from the WLAN module (see
Remove the display assembly:
1. Release the ZIF connector (1) to which display panel cable is connected, and then disconnect the display
panel cable from the system board.
2. Disconnect the webcam/microphone module cable (2) from the system board.
3. Release the wireless antenna cables from the retention clips (3) and routing channel built into the
left speaker.
Bottom cover on page
Battery on page 33).
31).
WLAN module on page
Component replacement procedures
37).
59