Before Working With The Machine - Winterhalter GS630 Manual

2.6 Daily cleaning and maintenance
 Adhere to the servicing and maintenance instructions in this manual ( 7).
 Wear protective clothing and protective gloves before touching parts with detergent solution (filters,
wash arms, ...).
 Do not spray the machine and the surrounding area (panels, base) using a water hose, steam-jet air
ejector or high-pressure cleaner.
Ensure that the plinth of the machine is not flooded when washing it in order to prevent an uncontrolled
inflow of water.
 Use a brush or a cloth and not a high-pressure cleaner when cleaning the inside of the machine.
 Do not use a scrubbing agent or an abrasive cleaner.
 During the daily cleaning process, ensure that there are no rusty external bodies in the machine which
can cause the "stainless steel rust-free" material to start rusting. Rust particles can come from non-rust-
free cleaners, damaged wire racks or non-rust-protected water lines.
 Clean and maintain the external areas using a suitable stainless steel cleaner and a soft cloth. We
recommend Winterhalter Gastronom stainless steel cleaners and stainless steel supports.
3

Before working with the machine

 Get the machine installed by your service engineer or authorised Winterhalter dealer. More information is
provided in chapter 12. If the install location is not frost-free, adhere to chapter 8.
 Get the machine connected as per the locally applicable standards and the regulations of the authorised
mechanics (water, waste water, electrical system). More information is provided in chapters 13 and 14.
 Get the machine commissioned by a service engineer authorised by Winterhalter. Get yourself and your
operating personnel trained in the operation of the machine.
3.1 Checking the completeness
 Check the delivery on the basis of the delivery note for completeness and transport damage.
 In case of any damage, inform the shipper, the insurance agency and the manufacturer about it.
3.2 Commissioning
 After connecting the water and the current properly, contact the relevant Winterhalter dealer or your
dealer for the commissioning of the machine and for providing training in its operation.
Before working with the machine
English 27