Winterhalter GS630 Manual page 15

7.1.2 Manual cleaning of the machine interior
Open the machine
door
Clean the filter
cassette
If the interior of the machine is dirty: Clean the interior with a sponge and a brush. If
necessary, spray it using a hose.
Clean the sieves from the pump suction openings using a brush. The sieves can be
removed if required.
Mount the filter
cassette and the
strainers
 Press the on/off key (1) to switch on the machine
 Press key 2 for approx 2 seconds and then release it
 The water in the tank is pumped out and the machine then switches off
 Close the local shut-off valve for the water supply
 Switch off the local mains disconnector
7.1.3 Cleaning the exterior of the machine
 Clean the external surfaces using a stainless steel cleaner and stainless steel support.
 Open the machine door a little so that the interior can dry. This is important for long-term corrosion
protection even in case of stainless steel.
7.1.4 Checking the external water preparation
 Check whether sufficient regenerating salt has been filled
Fold the lower Remove the lower
rinsing pipes and upper wash
upward arms
Clean the strainers Clean the wash
arms
Mount the lower Fold the lower
and upper wash rinsing pipes
arms downward
English
Servicing and maintenance
Remove the filter
cassette and the
strainers
Close the machine
door
37