Anti-Tip Wheels - progeo JOKER ENERGY User Manual

Fig.57
To use this accessory it is necessary to remove the rear wheels
(see chapter 5.5 "Quick-release rear wheels").
The use of this accessory the wheelchair becomes both narrower
and shorter.
The transit wheels can also be removed from their support by
sliding the tube off its support after pressing the release button "A"
which locks it in position.
For a correct assembly of the transit wheel it must be remembered
that when inserting it into the support, the pin "A" should always face
toward the inside of the wheelchair.
It must be remembered that while using the transit
wheels (with the rear wheels removed), the parking
brakes will not work at all.
7.3 Anti tip wheels
(figure 58)
This accessory has been designed to prevent the wheelchair
from tipping back. In order to ensure that it works correctly it should
be adjusted to a distance of 2-3 cm from the ground.
Fig. 58
JOKER ENERGY 36