Tipping Aid - progeo JOKER ENERGY User Manual

The adjustment of the height is carried out by removing fixing
screw "A" (using a 3 mm Allen key and a 8 mm spanner).
Raise or lower the anti-tip wheel tube by sliding it up or down the
support "S" , until the desired height is reached. Once the correct
position has been reached re-tighten the screws "A" in the nearest
hole.
The anti-tip wheels can be removed completely or simply rotated
inwards depending on requirements, for example, when ascending
steps.
To rotate the anti-tip wheel inwards push it down enough to free the
locking system and turn the anti-tip tube inwards by 180° .
To remove the anti tipper, first push forward the fixing pin "P"
positioned in the upper part of the support "S" and pull the armrest
down.
Insert and push the armrest up in the support hole in order to fix it.
An audible click indicates that the support is locked.
7.4

Tipping aid

(figure 59)
This accessory has been designed to enable the assistant to tip
back the wheelchair without a great effort so as to go over small
steps easily. With one foot, press down on the plastic support (fig.
61) while, at the same time, applying downward force onto the push
handles.
Fig.59
JOKER ENERGY 37